RAD Cafe Table, Rectangular Bolt Down Base T Leg in white oak europly and white powder coat.
RAD Cafe Table, Rectangular Bolt Down Base T Leg in white oak europly and white powder coat.

Cafe Table

Rectangular Top, Bolt Down Base T Leg
/

CA-CTABSBT601-4A-T

Available in thousands of combinations, the Cafe Table series is all about flexibility. See more base options.
Dimensions:
  • Dining: 52" L x 30" W x 29" H
  • Counter: 52" L x 30" W x 35" H
  • Bar: 52" L x 30" W x 41" H
Stackable:
No
Outdoor:
No
Materials:
Tabletop: White Oak Europly; Base: Powder Coated Steel
Downloads:
Cutsheet

Wood: Clean periodically with a damp cloth solution of mild anti-bacterial soap and water. If sanding is required to remove stains, etc, inquire with RAD as to what product should be used for re-finishing after sanding.

Metal: All powder coated products should be cleaned with either a soft cloth or soft-bristle brush, using a solution of mild anti-bacterial soap and (preferably warm) water. The best type of soap to use for this purpose is one that has emulsifiers that can break down the most common types of stains, like a pH-neutral liquid hand-dishwashing detergent. Exposed surfaces of powder coated products that are deemed the most critical should be cleaned regularly (on either a weekly or a bi-weekly schedule). These can be wiped down and rinsed with filtered water.

Our indoor woods receive a low-VOC polyurethane finish, chosen for its durability and low impact on the environment during application. FSC certified woods are available upon request.

Steel is a readily available, endlessly recyclable material known for its strength and durability. Because it is near unbreakable, the majority of our chairs can support up to 600 pounds.

Powder coat has a long lifespan. Because it resists chipping and scratching, retains color, and produces no off-gassing, powder coat has become an industry-wide preference.. Because it is applied electrostatically, no particles are emitted into the environment during application. Steel can be re-coated if needed, indefinitely prolonging the lifespan of your furniture.

Manufacturing domestically gives us control over manufacturing inputs. This allows us to achieve efficiencies in production and material use, thereby limiting our waste.

Our furniture contributes to specific LEED credits. For questions about specific environmental qualifications, contact us.

Powder coat: 10 years

Warranty does not apply to the exact colors and appearances of any wood.

Limited lifetime warranty (structural)