RAD Cafe Table, Rectangular 2 Top Flat Four Point Base in acrylic and white powder coat.
RAD Cafe Table, Rectangular 2 Top Flat Four Point Base in acrylic and white powder coat.

Cafe Table

Rectangular Top, Flat Four Point Base
/

CA-CTABST501-2A-T

Available in thousands of combinations, the Cafe Table series is all about flexibility. See more base options.
  • 2 Top Dimensions:
    • Dining: 30" L x 24" W x 29" H
    • Counter: 30" L x 24" W x 35" H
    • Bar: 30" L x 24" W x 41" H
  • 4 Top Dimensions:
    • Dining: 36" L x 36" W x 29" H
Stackable:
No
Outdoor:
Yes
Materials:
Tabletop: Acrylic; Base: Powder Coated Steel
Downloads:
Cutsheet

Acrylic: Wipe clean with a damp cloth or sponge soaked in water. For basic stains, clean with mild detergents or general all purpose cleaners. Periodically go over the entire surface with a mild abrasive cleanser or a wet blue Scotch Brite™️ pad to maintain a uniform appearance.

Metal: All powder coated products should be cleaned with either a soft cloth or soft-bristle brush, using a solution of mild anti-bacterial soap and (preferably warm) water. The best type of soap to use for this purpose is one that has emulsifiers that can break down the most common types of stains, like a pH-neutral liquid hand-dishwashing detergent. Exposed surfaces of powder coated products that are deemed the most critical should be cleaned regularly (on either a weekly or a bi-weekly schedule). These can be wiped down and rinsed with filtered water.

Our acrylic is GREENGUARD Gold certified and produced in the USA.

Steel is a readily available, endlessly recyclable material known for its strength and durability. Because it is near unbreakable, the majority of our chairs can support up to 600 pounds.

Powder coat has a long lifespan. Because it resists chipping and scratching, retains color, and produces no off-gassing, powder coat has become an industry-wide preference.. Because it is applied electrostatically, no particles are emitted into the environment during application. Steel can be re-coated if needed, indefinitely prolonging the lifespan of your furniture.

Manufacturing domestically gives us control over manufacturing inputs. This allows us to achieve efficiencies in production and material use, thereby limiting our waste.

Our furniture contributes to specific LEED credits. For questions about specific environmental qualifications, contact us.

Powder coat: 10 years

Warranty does not apply to the exact colors and appearances of any wood.

Limited lifetime warranty (structural)