RAD Signature Bent Bench in perforated steel and white powder coat.
RAD Signature Bent Bench in perforated steel and white powder coat.

Signature Bent Bench

/

RS-BBNCH201-0

Designed with a minimal profile, the Bent Bench is constructed with a 1" bent steel tube frame and a steel seat with 3/4" perforations. Built to withstand the outdoor elements and the absolute heaviest of indoor uses, its perforated seat minimizes dirt and dust accumulation, drains when wet, and is easy to clean. The Signature Bent Bench complements its Bent Tube Bar Stool and Bent Tube Stool counterparts. A boltable foot is available upon request.
Dimensions:
  • Medium: 48" W x 18.5" D x 18" H
  • Large: 60" W x 18.5" D x 18" H
  • XL: 78" W x 18.5" D x 18" H
Stackable:
No
Outdoor:
Yes
Materials:
Seat: Powder Coated Perforated Steel; Perforation Dia: 3/4"; Frame: Powder Coated Steel
Cutsheet:
Medium:
SketchUp 3D CAD (DWG) Rhino7 (3DM)
Large:
SketchUp 3D CAD (DWG) Rhino7 (3DM)
X-Large:
3D CAD (DWG) Rhino7 (3DM)

NOTE: DWG files may be imported into REVIT

All powder coated products should be cleaned with either a soft cloth or soft-bristle brush, using a solution of mild anti-bacterial soap and (preferably warm) water. The best type of soap to use for this purpose is one that has emulsifiers that can break down the most common types of stains, like a pH-neutral liquid hand-dishwashing detergent. Exposed surfaces of powder coated products that are deemed the most critical should be cleaned regularly (on either a weekly or a bi-weekly schedule). These can be wiped down and rinsed with filtered water.

Steel is a readily available, endlessly recyclable material known for its strength and durability. Because it is near unbreakable, the majority of our chairs can support up to 600 pounds.

Powder coat has a long lifespan. Because it resists chipping and scratching, retains color, and produces no off-gassing, powder coat has become an industry-wide preference.. Because it is applied electrostatically, no particles are emitted into the environment during application. Steel can be re-coated if needed, indefinitely prolonging the lifespan of your furniture.

Manufacturing domestically gives us control over manufacturing inputs. This allows us to achieve efficiencies in production and material use, thereby limiting our waste.

Our furniture contributes to specific LEED credits. For questions about specific environmental qualifications, contact us.

Powder coat: 10 years

Warranty does not apply to the exact colors and appearances of any wood.

Limited lifetime warranty (structural)